ROTOR FIX KIT
DON'T PANIC
This kit ingenious design is a multi-issue problem solver. It increases the safety performance of your drone and stabilizes the camera while in flight. By stabilizing your drone, you will be sure to have the clearest and highest quality images.
THE ROTOR KIT
The original and only kit that offers a complete solution to the issue that plagues a number of Inspire 2 drones. A complexly engineered product, yet simple to install. It is not aesthetically or mechanically intrusive, and does not void the warranty.
Peace of mind while in flight... Priceless
COMPONENTS




2x Collar S

2x Collar B

2x Clamp A

2x Clamp B

2x Hex Key

4x Screws

1x Tightener

4x Adhesive
TECH SPECS
94g
TOTAL WEIGHT
Ultralight
PA 12
MATERIAL
Super resistant
AL 6061
METAL
Air craft grade
FIX
SCREWS
Blued Steel 10.9 Screws
ASSEMBLY
Watch the video below for a quick tutorial on how to mount your Rotor Safe Kit.
The patent pending solution has been 100% designed and enginered by Atellani in Italy.
Parts are made in: Germany, Italy and China.
QUICKSTART GUIDE
THE RIGHT AND THE LEFT ROD HAVE DIFFERENT MOUNTING PROCEDURES
9 EASY STEPS
Left ROD mounting instructions

Start mounting the left kit, by facing the left side of the drone. The mounting procedures have to be made in landing mode.

First place Clamp A around the landing gear and insert the Left Rod into the hole. Repeat the procedure on the other side placing Clamp B and screwing the Left Rod clockwise.

Use the Tightener to turn the Spring Pin clockwise until the Left Rod in completely firm and the Pin is in upright position.

Use a coin or any other sturdy tool to push the Spring Pin up until it sticks out rom above the Rod only.

Place the adhesive strips on the inside of Collar B and Collar S.

Place the Collar S behind the drone’s arm and the Left Rod. Make sure the Spring Pin is placed in the middle of the Collar.

Align the upper parts of Collar B and Collar S. Snap them into place, ensuring all parts are completely secured and enclosed.

Tighten both screws with the Hex Key to secure the Collars. Be careful not to deform the plastic components.
Right ROD mounting instructions

RIGHT ROD: Please note that the Right Rod follows the same procedure as the left, but the rod needs to be screwed counter clockwise.